Products

 1.0/2.3

Icon Flexible Cable-Crimp AttachmentIcon Printed Circuit Board Receptacle
Icon Semi-Rigid Cable-Direct Solder Attachment 

Specification

50 ohm 0-4 GHz
The 1.0/2.3 connectors are smaller in size with application up to 4 GHz that are reliable in boardband performance and popularly used in telecommunication system.  With its high mechanical strength, high durability, the posh-pull on coupling latch can provide better solution to prevent accident disconnection.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Interface Dimensions :

PLUG

Letter
Millimeters(Inches)
Minimum
Maximum
A
0.48(.019)
052(.020)
B
--------
1.15(.045)
C
      --------          5.50(.217)
D
5.40(.213)
5.70(.224 )
E
  ---------
1.02(.040 )
F
2.30(.091) NOM.
G
 SLOTTED AND FLARED TO MEET ELECTRICAL AND MECHANICAL REQUIREMENTS

JACK

Letter
Millimeters(Inches)
Minimum
Maximum
A
2.30(.091) NOM.
B
3.00(.118)
3.06(.120)
C
4.30(.169)
4.15(.163)
D
1.15(.045)
1.75(.069)
E
5.80(.228)
5.90(.232)
F
6.40(.252)
6.50(.256)
G
---------
1.02(.040)
 
Electrical :
Impedance 50 ohm
Frequency Range 0 to 4.0 GHz
VSWR

Straight : 1.3 max 

Right Angle : 1.5 max
 Voltage Rating 250 volts rms max at sea level
Dielectric Withstanding Voltage 750 volts rms
Contact Resistance center contact=3.0 Milliohms max
outer contact=6.0 Milliohms max
Insulation Resistance 1,000 Megohms min


 
Mechanical & Environmental :
Mating " Push Pull " snap-on  coupling
Durability 500 matings
Cable Retention RG-58,141,142,223 →40 lbs min
RG-174,188,316 →15 lbs min
Temperature Range -40°C to 165°C
Vibration MIL-STD-202 Method 204 Test Cond. D.
Salt Spray MIL-STD-202 Method 101 Test Cond. B.
 
Meaterial :
  Material Plating
Connector Body Brass Nickel or Gold
Center Contact Male:Brass
Female:Brass,
Phosphor Bronze or
Beryllium Copper		 30u" Gold Over 50u" Nickel
Insulation Teflon or Delrin None
Gasket Silicone Rubber, Rubber None
Crimp Ferule Annealed Copper Same as Body