Products

 SMA

Icon Bulkhead Mount Receptacle (Solder Pot Contact)Icon Edge Surface Mount Receptacle
Icon End Launch ReceptacleIcon Flexible Cable-Clamp Attachment
Icon Flexible Cable-Crimp AttachmentIcon In series Adapter
Icon Panel Mount Receptacle (Blunt Post Contact)Icon Panel Mount Receptacle (Exposed Teflon)
Icon Panel Mount Receptacle (For Microstrip Line Circuits)Icon Panel Mount Receptacle (Half Round Contact)
Icon Panel Mount Receptacle (Slotted Contact)Icon Panel Mount Receptacle (Solder Pot Contact)
Icon Panel Mount Receptacle (Tab Contact)Icon Press In Mount Receptacle
Icon Printed Circuit Board ReceptacleIcon Semi-Rigid Cable-Direct Solder Attachment
Icon Surface Mount Receptacle 

Specification

50 ohm 0-18 GHz
SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 12.4 GHz with flexible cable. Semi-rigid cabling extends the frequency range of the device to 18 GHz. These devices offer broadband performance with low reflection and constant 50 ohm impedance. Impedance. These properties, along with minimum attenuation and low VSWR have made the SMA extremely popular in the microwave community.

The SMA design has been broadened to accommodate many interconnect requirements and is available in pressure crimp, clamp and solder terminal attachments. SMA design paramenters have incorporated the considerations of balancing cost , size , weight and performance to yield the best value in your microwave system. Among typical applications are components, such as dividers , mixers , amplifiers , trimmers and attenuators. SMA cinnectors are also used to provide interconnections from printed circuit board striplines to coaxial cable.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interface Dimensions :

PLUG

Letter
Millimeters(Inches)
Minimum
Maximum
A
0.00(.000)
0.30(.012)
B
0.90(.0355)
0.94(.037)
C
—
4.59(.1808)
D
6.35(.250)
—
E
0.00(.000)
0.25(.010)
F
0.00(.000)
0.25(.010)
G
—
2.54(.100)
H
—
3.43(.135)

JACK

Letter
Millimeters(Inches)
Minimum
Maximum
A
4.60(.1810)
-
B
5.28(.208)
5.49(.216)
C
0.00(.000)
0.25(.010)
D
0.00(.000)
0.25(.010)
E
2.67(.105)
—
F
1.88(.074)
1.98(.078)
G
0.38(.015)
1.14(.045)
H
4.32(.170)
—
I
5.54(.218)
—
 
Electrical :
Impedance 50 ohm
Frequency Range 0 to 18.0 GHz
• for RG-402 & RG-405 semi-rigid cable-0 to 18.0 GHz
• for flexible cable→max operation frequency of cable per MIL-C-17 (12.4 GHz maz)
VSWR
RG178U→ 1.2+0.025 f max (Straight)
1.2+0.03 f max (Right Angle)
RG316U→ 1.15+0.02 f max (Straight)
1.15+0.03 f max (Right Angle)
RG142U→ 1.15+0.01f max (Straight)
1.15+0.02 f max (Right Angle)
RG402→ 1.05+0.01 f GHz max (Straight)
1.1+0.01 f GHz max (Right Angle)
RG405→ 1.07+0.01 f GHz max (Straight)
1.1+0.01 f GHz max (Right Angle)
Working Voltage • RG-402(.141"OD.)→500 volts rms max
• RG-405(.085:OD.)→335 volts rms max
• RG-58,141,142,223→500 volts rms max
• RG-174,188,316→335 volts rms max
• RG-178,196→250 volts rms max
Dielectric Withstanding Voltage • RG-402(.141"OD.)→1,000 volts rms max
• RG-405(.085:OD.)→750 volts rms max
• RG-58,141,142,223→1,000 volts rms max
• RG-174,188,316→750 volts rms max
• RG-178,196→500 volts rms max
Contact Resistance center contact=3.0 Milliohms max
outer contact=2.0 Milliohms max
Insertion Loss 0.06 dB max × GHz @ 6 GHz
Insulation Resistance 5,000 Megohms min
 
Mechanical & Environmental :
Mating 1/4"-36 Threaded Coupling
Durability 500 matings
Coupling Nut Retention 60 lbs Min
Recommend Nut Mating Torque

Stainless Steel: 7 to 10 inch-pounds

Brass: 3 to 5 inch-pounds

Cable Retention RG-58,141,142,223→40 lbs min
RG-174,188,316 →15 lbs min
Temperature Range -65°C to 165°C
Vibration MIL-STD-202 Method 204 Test Cond. D.
Salt Spray MIL-STD-202 Method 101 Test Cond. B.
Thermal shock MIL-STD-202 Method 107 Test Cond. B.
 
Meaterial :
  Material Plating
Connector Body Stainless steel
Brass		 Passivated or gold
Nickel or gold
Center Contact Male:Brass
Female:Beryllium Copper		 50 µ " gold over 50 µ " nickel
50 µ " gold over 50 µ " nickel
Insulation Teflon None
Gasket Silicone Rubber None
Crimp Ferule Annealed Copper Same as Body