Products
Specification
50 ohm 0-7.5 GHz The 7/16 are designed for 50 ohm impedance to conform to the DIN standards, featuring excellent power-handling capability and low VSWR up to 7.5Gz. They provide superior performance for return loss and intermodulation distortion. These connectors are ideal for those applications where vibration resistance and environmental protection is important, such as radio base stations and broadcast communication application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interface Dimensions :
PLUG
Letter
Millimeters(Inches)
Minimum
Maximum
A
M 29 X 1.5
B
20.60(.811)
21.40(.843)
C
18.03(.710)
18.21(.717)
D
4.96(.195)
5.04(.198)
E
15.85(.624)
16.25(.640)
F
7.00(.276) nom.
G
1.40(.055)
1.60(.063)
H
1.47(.058)
1.77(.070)
I
7.00(.276)
8.00(.315)
J
—
4.5(.177)
K
7.00(.276)
9.00(.354)
JACK
Letter
Millimeters(Inches)
Minimum
Maximum
A
M 29 X 1.5
B
15.85(.624)
16.25(.640)
C
22.10(.870)
22.90(.902)
D
0.50(.020)
0.70(.028)
E
1.77(.070)
2.07(.082)
F
7.00(.276) nom.
G
—
18.5(.278)*
H
17.84(.702)
18.02(.709)
I
8.10(.319)
----
J
10.00(.394)
----
* prior to slotting
Electrical : Impedance 50 ohm Frequency Range 0 to 7.5Ghz VSWR ST: 1.3 max.
R/A: 1.5 max
Working Voltage 2,700 volts rms max. Dielectric Withstanding Voltage 4,000 volts rms max. Contact Resistance Center contact=0.4 Milliohms max Outer contact=1.5 Milliohms max Insulation Resistance 5,000 Megohms min
Mechanical & Environmental : Mating M29 X 1.5 threaded coupling Durability 500 matings Cable Retention RG-58,141,142,223→40 lbs min RG-8A, 9B,213, 214→80 lbs min
Temperature Range -65°C to 165°C
Meaterial : Material Plating Connector Body Brass Nickel or Silver Center Contact Male:Brass Female:Brass or Phosphor Bronze or Beryllium Copper Gold or Silver Insulation Teflon None Gasket Silicone Rubber None Crimp Ferule Annealed Copper Same as Body