Applied frequency up to 11 GHz for 50 ohm impendence Applied frequency up to 1 GHz for 75 ohm impendence
TNC series connectors are similar to BNC connectors except for their mating threaded coupling which is designed to provide low reflection from DC to 11 GHz under extreme environmental conditions, especially shock and vibration. Cable terminations are available in crimp, clamp, twist-on solder configurations. The 7/l6"-28 thread coupling provides positive mating. Although their rugged design was initially developed for high vibration environments, TNC connectors are widely accepted and used for data transmission, medical equipment, cellular mobile telephones, test equipment, microwave components and aerospace applications.
Close TNC Series Specification Table Open TNC Series Specification Table
|Impedance||50 ohm||75 ohm|
|Frequency Range||0 to 11.0 GHz||0 to 1.0 GHz|
|VSWR||Straight : 1.3 max. ; Right Angle ：1.35 max.|
|Voltage Rating||500 volts rms. max. at sea level|
|Dielectric Withstanding Voltage||1000 volts rms. max. at sea level|
center contact=1.5 Milliohms max.
outer contact=1.0 Milliohms max.
|Insertion Loss||0.2 dB max.@ 3GHz|
|Insulation Resistance||5,000 Megohms min.|
|Mating||7/16"-28 threaded coupling|
RG-58,141,142,223→40 lbs min.
RG-59,62A,210→40 lbs min.
RG-174,188,316→15 lbs min.
|Coupling Nut Retention||100 lbs min.|
|Temperature Range||-65°C to 165°C|
|Vibration||Refer to MIL-STD-202 Method 204 Test Cond. D.|
|Salt Spray||Refer to MIL-STD-202 Method 101 Test Cond. B.|
This is a TNC right angle plug connector for cable application. The RG58,58A,141A etc. are the suitable...Details
This is a TNC plug connector for cable application. The RG174U, RG316U, RG188 etc. are the suitable...Details
This is a TNC jack connector for cable application. The RG58, 58A, 141A etc. are the suitable...Details
SEALED Connectors - TNC Straight Bulkhead Jack Clamp (rear mount) for RG 174 or RG 316 or RG188 cable
This is a TNC jack sealed connector for cable application. The RG174U, RG316U, RG188 etc. are the suitable...Details
This is a TNC jack sealed connector for cable application. The RG178, 196U etc, are the suitable...Details
Declaration to Comply with EU RoHS Directives.
TNC Connector | Coaxial Cable | BNC Connector Exporter, Supplier & Manufacturer - Chin Nan®
Chin Nan® Precision Electronics Co., Ltd., since 1965, is one of the prime TNC Connector manufacturers based in Taiwan.
Custom and certified coaxial connectors, BNC connectors, and radio frequency connectors supplied by a verified and experienced manufacturer - Chin Nan®, has also obtained numerous patented cables and connectors.
Chin Nan® has been offering customers high-quality cables and connectors, both with advanced technology and 50 years of experience, Chin Nan® ensures each customer's demands are met.